View SPOR30D28_4542077.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SPOR30D28
TECHNICAL DATA
DATA SHEET 5054, REV-
ACTIVE ORING CONTROLLER MODULE
DESCRIPTION In fault tolerant, redundant power distribution systems, oring power diodes are commonly used, when paralleling multiple power supplies, to prevent the occurrence of reverse current if an individual power supply voltage falls significantly below the others. Despite of low-cost and easy implementation, the use of oring power diodes suffers from high power dissipation especially in high current applications. The active oring controller module is designed to replace oring power diodes in high-reliable 28V DC aircraft power systems. Each module is designed to parallel two power supplies with current rated up to 30A on each line. The module uses low onresistance oring MOSFETs driven by an oring controller. Compared to oring power diodes, this module dissipates very low power loss and can be operated without any heat sink. In addition, the module can detect faults of dead short in the sourcing supply, a blown fuse, over load current, or opencircuit of oring MOSFETs. This module also provides an interface for customers to diagnose the shortcircuit fault of oring MOSFETs. MODULE FEATURES * * * * * * * * * * * Suitable for 28VDC power systems with current rated up to 30A No additional heat sinking or external cooling required No external bias supply required Low power dissipation Smooth switchover between two sourcing supply 0.5 s turn-off time limits peak reverse current Ability to reports faults of dead short power supply, blown fuses, over load current, and opencircuit of oring MOSFETs Ability to check short-circuit fault of oring MOSFETs TTL and COMS compatible control input/output Compact design Epoxy shell construction
221 West Industry Court, Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 2429798 World Wide Web- http:// www.sensitron.com Email Address- sales@sensitron.com Page 1
SPOR30D28
TECHNICAL DATA
DATA SHEET 5054, REV-
ELECTRICAL CHARACTERISTICS (Tested under 25C unless otherwise specified) Power Input Voltage From 15V to 40V Power Dissipation See Fig 4 Current Typical 30A Maximum Voltage Drop See Fig 3 Control PWRFLT1, PWRFLT2 FUSEFLE1, FUSEFLT2 Pins Output Low LINE1HI, LINE2HI, Pins Output Low
PWRFLT1, PWRFLT2 FUSEFLE1, FUSEFLT2 , LINE1HI, LINE2HI, Pins Leakage Current FETCHK1, FETCHK2 Pins Input Current
100mV typical 200mV maximum 150mV typical 400mV maximum 0 typical 1A maximum
80mA maximum
PHYSICAL CHARACTERISTICS TEMPERATURE Operating Temperature Storage Temperature
TA= - 40 C To 85 C TA= - 55 C To 125 C
221 West Industry Court, Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 2429798 World Wide Web- http:// www.sensitron.com Email Address- sales@sensitron.com Page 2
SPOR30D28
TECHNICAL DATA
DATA SHEET 5054, REV-
MECHANICAL DIMENSIONS (in Inches)
221 West Industry Court, Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 2429798 Page 3 World Wide Web- http:// www.sensitron.com Email Address- sales@sensitron.com
SPOR30D28
TECHNICAL DATA
DATA SHEET 5054, REV-
PIN DEFINITIONS Pin Symbol LINE1, LINE2 FUSE1, FUSE2 Pin Description
Load FETCHK1, FETCHK2
LINE1HI, LINE2HI
GND
PWRFLT 1 , PWRFLT 2 FUSEFLE1 , FUSEFLT 2
28V line input pins If fuses are required in the power distribution path, they can be located between LINE1, 2 and FUSE1, 2. Otherwise short LINE1, 2 and FUSE1, 2. Output pin of the module. This pin is used to connect to the load. FET check input pins. Together with PWFLT1, 2 output pins, the FETCHK1, 2 pins can be used to determine the short-circuit fault of oring MOSFETs. These two pins indicate which channel has higher line voltage. The pin of higher line voltage gives open drain output, otherwise it is shorted to GND. Ground of the module. This pin should be connected to 28V return. Output pin of fault detection. (see Fault Table for details) Output pin of blown fuse detection.
FAULT TABLE1
FETCHK Low Low Low Low
VDS (V) <250mV True True True True
VFUSE (V) >3.5V True True False False
VLINE (V) >26V True False True False
FUSEFLT
PWRFLT
COMMMENTS Normal operation VLINE1 <26V Blown fuse VLINE1 <3.5V or Combination of proceeding two faults Open-circuit fault in MOSFETs or Iload >180A Short-circuit fault in MOSFETs Good MOSFETs
Hi-Z Hi-Z Pull-Down Pull-Down
Hi-Z Pull-Down Hi-Z Pull-Down
Low High2
False
True
True
Hi-Z
Pull-Down
True
True
True
Hi-Z
Hi-Z
High2 False True True Hi-Z Pull-Down Note1: Fault table is valid for both line1 and line2. Note2: FETCHK can only be applied on the line with pin LINE1(2)HI high.
221 West Industry Court, Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 2429798 Page 4 World Wide Web- http:// www.sensitron.com Email Address- sales@sensitron.com
SPOR30D28
TECHNICAL DATA
DATA SHEET 5054, REV-
TYPICAL APPLICATIONS
Fig. 1 Basic application
Fig. 2 A design example
221 West Industry Court, Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 2429798 Page 5 World Wide Web- http:// www.sensitron.com Email Address- sales@sensitron.com
SPOR30D28
TECHNICAL DATA
DATA SHEET 5054, REV-
TYPICAL PERFORMANCE CHARACTERISTICS (Tested under 25C unless otherwise specified)
48 46 44 42 40 38 36 34 32 30 10 20 Load Current (A) 30
Fig3. Input and output voltage drop versus load current
2 Power Dissipation (W)
Voltage Drop (mV)
1
0 10 20 Load Current (A) 30
Fig4. Power dissipation loss versus load current
221 West Industry Court, Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 2429798 Page 6 World Wide Web- http:// www.sensitron.com Email Address- sales@sensitron.com
SPOR30D28
TECHNICAL DATA
DATA SHEET 5054, REV-
DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user's units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
221 West Industry Court, Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 2429798 Page 7 World Wide Web- http:// www.sensitron.com Email Address- sales@sensitron.com

▲Up To Search▲

Price & Availability of SPOR30D28

	To Download SPOR30D28 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .